• Specialist Printing Industry Distributor
 
0
Fife H3218 Center-Guide Detector

Fife H3218 Center-Guide Detector

The Fife H3218 center-guide detector provides a signal proportional to the center position of a strip of material; independent of material width. Two models of the H3218 are available; depending upon light source choice. The H3218 is for use with the H3137 family of fluorescent light sources. An enhanced version, the H3218E, is for use with the H3157E LED light source. Advanced signal processing allows the H3218 to discriminate between the pulsed light from either the H3137 or H3157 and other sources of light.

Categories: , , , Brand:

Description

H3218 CENTER-GUIDE DETECTOR SPECIFICATIONS

[tabbed_section style=”default” alignment=”left” spacing=”default” tab_color=”Accent-Color”][tab icon_family=”none” title=”Imperial” id=”1590500225086-0″ tab_id=”1590500225087-0″]
  • Power Requirements10 to 30 Vdc at 3.3 watts
  • Analog Output:+/- 10 Vdc proportional to strip centerline
  • Status Output:Contact closure indicates normal detector operation
  • Recommended Gap with Light Source:2 to 10 feet
    0.6 to 3 meters
  • Sensor SizingSensor is sized based on minimum and maximum strip widths. Refer to selection chart for specific sensor model numbers.
  • Three ConnectorsTwo for power and communications, one for H3218 analog output
  • Lens MaterialsPolycarbonate
  • Operating Temperature Range0 to 50° C
    32 to 122° F
  • Recommended Passline (from light source to material)50% of gap
[/tab][tab icon_family=”none” title=”Metric” id=”1590500225107-7″ tab_id=”1590500225108-10″]
  • Power Requirements10 to 30 Vdc at 3.3 watts
  • Analog Output:+/- 10 Vdc proportional to strip centerline
  • Status Output:Contact closure indicates normal detector operation
  • Recommended Gap with Light Source:2 to 10 feet
    0.6 to 3 meters
  • Sensor SizingSensor is sized based on minimum and maximum strip widths. Refer to selection chart for specific sensor model numbers.
  • Three ConnectorsTwo for power and communications, one for H3218 analog output
  • Lens MaterialsPolycarbonate
  • Operating Temperature Range0 to 50° C
    32 to 122° F
  • Recommended Passline (from light source to material)50% of gap
[/tab][/tabbed_section]

Related products